What Is The Greenlee Brand Known For?
Tools are a necessary component of any job. They can be a huge time saver or a major pain in the butt and in the pocket. But if you know where to look, you can find the right tool for almost every job out there.
Greenlee is a manufacturer of hand tools, from hand saws to punch tools, as well as other tools. Greenlee tools are made with high-quality materials, designed for long-term durability. Greenlee tools are used by professionals, tradesmen, and DIY enthusiasts.
Greenlee tools are known for their quality and durability, as well as for their innovative designs that maximize productivity and reduce downtime. They offer a wide variety of hand tools and their specialty is cable and pipe cutting tools. They also offer hand tools that workers use in the electrical industry.
Greenlee makes tools for the construction professional, do-it-yourselfer, and electrician. They are one of the best brands when it comes to value for money
Let’s look at some of the best-rated Greenlee products and see what customers think about the brand and its products…
Greenlee Is A MIND-BOGGLING Brand For Conduit Benders
The following Greenlee product has a MIND-BOGGLING 92% of consumers rating it 5 out of 5 stars…
The Greenlee Offset Conduit Bender is a heavy-duty tool for bending conduits that helps save time and labor. The offset design allows the entire bend process to be done inside a small area, reducing time wasted setting up and taking down lanes.
The offset design also makes it easier to work with smaller conduit sizes, up to and including 1-1/2In.EMT. This bender allows right or left-hand bends in any radius from 1/2In.to 12In. while eliminating the need for costly fittings.
The Greenlee Offset Conduit Bender, 1/2In.EMT, is an offset conduit bender capable of bending a 1/2 round conduit with a maximum radius of over 180 degrees. This tool is designed to allow a user to bend a conduit with the same radius as needed for the conduit being bent. This tool is a must have for any building contractor or facility that has a need for bending conduit in conduit runs.
The new Greenlee 1/2 inch EMT Conduit Bender makes 45-degree bends in conduit. The unique offset allows use in smaller spaces…
Offset Conduit Bender, 1/2In.EMT
- The bender’s groove joint, horizontal design is ideal for alignment and easy placement of the conduit.
- The hardened steel claws are offset to keep holes straight and won’t mar the conduit.
- The Greenlee 1111/2″ 1/2″ EMT conduit bender is a hard-working tool that’ll work with both rigid non-metallic and steel electrical conduit.
- This tight radius bender offers unmatched strength and durability, making it ideal for your more complex bending jobs.
- Made of polished aluminum and featuring precision manufacturing, the Greenlee 1/2″ EMT Conduit Bender is built to last for a lifetime of tough uses.
Greenlee Is An AMAZING Brand For Hand Benders
The following Greenlee product has an AMAZING 81% of consumers rating it 5 out of 5 stars…
Open your door to the world of benders with the Greenlee 841AH 3/4″ HAND BENDER. This carpenter’s favorite is built to fit small spaces and packed with features such as the powerful GS series variable speed motor, iGrill capability to connect with a temperature probe for safe use in icy conditions, and an adjustable depth stop for repeatable bends. Welcome to the Greenlee family.
The Greenlee 841AH Bender,Hand-3/4″ W/Handle is a hand-operated bender that features push-button operation and an adjustable handle to accommodate different user heights.
A Bender is used for threading or bending conduit or tubing and may bend round bar or sheet metal as well. The long handle on the Greenlee 841AH Bender increases efficiency and helps reduce user fatigue…
Greenlee 841AH BENDER,HAND-3/4″ W/HANDLE
- It is made of forged alloy steel and has a black phosphate finish, which will not chip or flake.
- The bender has an adjustable cable stop pin that prevents the smooth wire from binding when bending heavy-wall conduits.
- Features an ergonomic handle and plastic shell for a comfortable grip.
- The bender has a tension spring that forces the handle toward the outside, reducing hand fatigue when bending large diameters of wire.
- The Greenlee 841AH is a single-handed bending tool designed for double-arc bending operations.
- This tool is made from sturdy steel plate materials, and it features a 60° flexible head.
- The body of this bending tool is designed with an ergonomic grip handle that reduces operator fatigue while ensuring increased comfort and ease of use.
Greenlee Is An AMAZING Brand For PVC Heating Blankets
The following Greenlee product has an AMAZING 82% of consumers rating it 5 out of 5 stars…
Get the job done quicker with Greenlee 1 inch PVC heating blanket. This innovative, flexible, plastic pipe heating blanket is made of solid PVC and includes an electrical power cord, jam nuts that allow easy installation of the heating strips, and thermally bonded insulation for uniform heat distribution.
Greenlee PVC heating blanket is a snug-fitting, economical PVC blanket that provides affordable, long lasting protection for your expensive greenhouse. The blanket is perfect for stretching over greenhouses and is ideal for all season use. Our special heat resistant insulation reflects up to 90% of radiant energy below the blanket!
Greenlee Heating Blankets are made of a non-flammable closed-cell PVC material for extended durability. It has a silver color finish that will last the life of the blanket and an anti-static top surface that will not attract lint or dust…
PVC Heating Blanket
- Simply wrap the blankets around the pipe, attach them together with aluminum tape, and plug into a 3/8″ quick connect the plug to complete the circuit.
- The Greenlee heating blanket provides lasting warmth and comfort that makes your space feel like home.
- This PVC heating blanket offers the safety and convenience of a plug & play design so you can set it and forget it, without worrying about temperature settings or wires.
- The Greenlee Heat Cable comes in a variety of sizes and lengths for temporary or permanent use.
- The heating blanket is a thin PVC/rubber-coated insulation material with heating wire woven throughout its length.
- This Durable heat tape protects against damage to costly lines, insulates tubing for safety and convenience, and has an ultra-fine wire that provides maximum heat coverage without damaging the insulation around it.
- And because it’s portable, efficient, and requires no trenching it’s also ideal for use in commercial settings where facility accessibility, gas shut-off valves, and special construction may prevent trench heating.
Greenlee Is An Excellent Brand For Ratchet Cable Cutters
The following Greenlee product has an excellent 77% of consumers rating it 5 out of 5 stars and has reached Amazon Choice status…
Looking for a Lightweight, Ergonomic, and Durable ratchet cable cutter? Look no further than the Greenlee center-cut bright zebra ratcheting cable cutter. This 10-1/2 inch cutter is the perfect tool for cabling plastic or copper cables up to 1/4 inch in diameter.
Featuring a lightweight design of 12.5 oz this product has a corrosion-resistant body and ergonomic grip for more comfort on the job site.
The Greenlee 10-1/2″ center-cut ratcheting cable cutter is the preferred tool for cutting communications, computer and fiber optic cables. The hardened cutters minimize reactivation and jacket damage while the large push button knob operates with one hand.
The Greenlee 10-1/2″ center cut cable cutter is perfect for use on steel wire type of wire as well as pipe and hose. The cable cutter is equipped with a holding device to secure the wire or cable while cutting…
Ratchet Cable Cutter, Center Cut, 10-1/2In
- The Ratcheting cable cutter has been very popular and we are happy to offer an additional size.
- Cut more industrial and commercial wire cable in half with this Greenlee ratchet center-cut cable cutter.
- Ideal for use on communication and electrical wires, its die-cast housing is made out of aluminum and powder-coated for durability.
- This ratchet cable cutter has a durable, all-steel construction, with a textured, slip-resistant handle.
- It features sturdy, high visibility alignment ears and a carbide center punch.
Greenlee Is A MIND-BOGGLING Brand For Cable Termination Cutters
The following Greenlee product has a MIND-BOGGLING 97% of consumers rating it 5 out of 5 stars…
Whether you’re working in the garden or around the house, Greenlee Cutter & Cable Scissors make the job easier. Use them to cut a variety of plants and flowers, or to cut through trees and brush. Greenlee Cutter & Cable Scissors also work great for cutting fishing lines and braid. They can even cut through sealed wires coated with oil or tar!
Greenlee 701 Cable-Cutter and Splicing Kit is a benchmark product among other cable cutters because of its perfect cutting length. This Greenlee 701 has extra-sharp, razor-edged knifepoint that cuts through even the toughest of cable jacketing materials easily. Its serrated edge also allows for easy cutting on cables with stripped jackets.
Greenlee cutter is a lean, ergonomic design that resists fatigue. This puts less stress on your hands and fingers, helping you to cut through the toughest materials…
Greenlee – Cutter, Cable-Scissors (706), Cable Termination
- Greenlee Cable Termination Tool kit is designed for cutting electrical cable, laminating, and fiber optic cables in 110V and 220V cuts.
- This kit includes four cable cutters, an insulation resistance tester, and a hot knife.
- With these tools, you can be more efficient and productive.
- Monitors, mobile phones, computers, and audio/video equipment can tangle the cords with ease.
- The Greenlee 806 F-Series spring-loaded cable cutter is used to cut computer cables, speaker wire, and coaxial video and audio cables.
- The F-Series provides a safe alternative for wiring installations using solid copper or low voltage wires without the need of using heavy-duty utility scissors.
- The spring-loaded cable cutter cuts non-armored wire ranging in size from 24 to 12 AWG.
- The next generation of wire and cable cutters is here.
- Engineered with a hardened steel blade, Greenlee cutters are designed to make your job easier.
- Greenlee Cutters Cut like a knife through butter.
- No more sore arms from trying to cut wire or cable.
Greenlee Is An Excellent Brand For Knockout Punch Driver Kits
The following Greenlee product has an excellent 79% of consumers rating it 5 out of 5 stars…
Greenlee hand pumps are one of the most popular brands of power tools in the country. Their products are known for their durability, reliability, and affordable prices. Their products are always a great buy and a great quality.
The heavy-duty Greenlee 7310SB features a welded steel frame and a powerful, 1/2 hp motor for all your professional uses. This pump is ideal for large bore air tools, air hammers and pneumatic chipping hammers. Unique low profile, durable design provides less tripping hazard and offers easy use in any position.
This is a Greenlee 1/2″ to 4″ Hand Pump which is great for transferring oil and grease from one location to another, and to your engine. This durable hand pump is easy to use, and with the ability to connect hoses, it offers convenient versatility…
Greenlee 7310SB HAND PUMP HYD, SB, 1/2″ – 4″
- Easy to inflate and easy to use, the Greenlee 7310SB hand pump features a padded grip for comfort and a gauge that reads in both inches and centimeters.
- This compact pump is ideal for tires, athletic balls, and other equipment requiring air pressure.
- The Greenlee 7310SB hand pump is a positive displacement pump designed for use with potable water and mineral spirits.
- It has a cast pump head with an internal diaphragm and excels in high flow applications such as washing cars or small equipment.
- The 7110SB has an extra-long threaded shaft for easy pumping from awkward positions, cast iron cylinder, and triple-cam piston assembly with a brass piston rod.
- The extra-long handle minimizes “whipping” of the pump, reducing fatigue.
Greenlee Is A Mind-Boggling Brand For Power Tool Accessories
The following Greenlee product has a MIND-BOGGLING 100% of consumers rating it 5 out of 5 stars…
The Greenlee GSBSET3 Step Bit Set is the perfect toolkit for any contractor. Each bit features a black oxide finish, as well as a deep groove design for added durability and strength. The set comes with the most frequently used sizes in a convenient cleaning tool.
This set is a combination of the three most popular bit sizes in the GS series. Designed for entry level users, these bits are a great choice for metalworking, woodworking, electrical and plumbing work. The two step design allows you to set in the desired depth by first placing the bit in the correct depth and then turning the lever. Models are available in 1/4″, 3/8″, and 1/2″ bit sizes.
The Greenlee GSBSET3 Step Bit Set takes the guesswork out of bit selection. It includes the most popular sizes for general construction applications. The set features a foam-lined case that makes organization and storage easy…
Greenlee GSBSET3 Step Bit Set (#1, 4, 9)
- These bits are designed to drive or drill into wood, plastic, or light metals.
- Proper selection of the step bit will depend on the material thickness, hardness, and type.
- These bits feature high-performance shanks, a 3-wrench section for strength and durability, and a TPR handle for comfort during operation.
- The combination of premium materials and precision machining makes these bits the ideal choice for drilling in wood products, manmade boards, concrete, metals, fiberglass, ceramic tile, or other rigid materials.
- Our Greenlee GSBSET3 Step Bit Set (Sizes 1, 4, 9) includes three handy driver bits, in sizes most commonly needed during installation for electrical and plumbing work.
- Each screwdriver bit has a precision tip which makes it easier to grip and control as you turn it; Its size and shape prevent slipping when fitted into screws.
- Our GSBSET3 set’s smooth, aerodynamic shell is specifically designed for durability.
- A non-slip handle offers greater comfort and control while you work.
- This set includes a durable case to store and keep all bits organized and clean.
Greenlee Is An AMAZING Brand For Test & Measurement Tools
The following Greenlee product has an AMAZING 86% of consumers rating it 5 out of 5 stars…
Greenlee is bringing a brand new line of tools and measuring instruments to the market, and this is their most advanced line of test and measurement instruments ever.
The DM-820A DMM, TRMS, AC/DC, CAP, TEMP are all new tools, and the DM-1100 is a new DMM model based on the DM-820A. The DM-820A is a 20-digit DMM, which is compatible with all the other Greenlee DMM models.
The Greenlee DM-820A, with its patented internal and external displays and intuitive controls, gives technicians the flexibility they need to make any type of measurement they encounter. Now measuring resistance, capacitance, inductance and other parameters is as easy as rotating a knob or pressing a button.
The DM-820A Digital Multimeter is a state-of-the-art tool for any professional or hobby spool cable installer…
Greenlee DM-820A DMM, TRMS, AC/DC,CAP,TEMP
- It has a large liquid crystal display with a backlight for easy viewing in dimly lit areas and is housed in a protective rubberized impact-resistant case with a hinged rear panel.
- The DM-820a Digital Multimeter is a complete test solution designed for the electrician who requires a versatile meter that is capable of measuring a range of tests.
- The DM-820A Phase Rotation Module allows phase rotation measurements to be made with one single DM-820A digital multimeter.
- The DMM measures the real-time current flowing through the hot conductor of a three-phase circuit or the apparent power in both single and three-phase applications, simultaneously records all readings on a PC.
In summary, Greenlee is a leading manufacturer of tools and related products for the electronics industry. The company offers a full line of rigid and tubular hole saws, punch and die sets, splice and solder stations, and other product lines.
Greenlee tools are used in the design, manufacture, and assembly of electronic and fiber optic equipment.
You may also be interested in… Is Ridgid A Good Brand? (Tough & Long-Lasting Plumbing Tools) and Is Sunex Tools Any Good? (Quality Tools For Automotive Repairs)
Allan Wilson who in the offline world has an extensive background working in research, analyzing statistics, improving work processes, team leading, and implementing training to improve results and now thanks to more than 3 years dedicated to this site is now also a highly regarded researcher of brands.
Allan has a long history of developing brands online way back before blogging existed creating websites using HTML code in Notepad. Allan established brands in the Info Product Marketing arena such as infoproductmarketing, ebookresellerkit, reprintrightsmarketing, along with many other successful websites (and a few failures along the way). Allan has also authored numerous ebooks, owned and operated membership sites, created eLearning courses, and more.
